Detachable zipper puller is a detachable and practical zipper puller for brands, including a slider body, a nose puller, a pull tab, and an elastic safety foot. No need to worry about damaged zippers! The universal detachable zipper puller is suitable for all kinds of zippers. They made of ABS resin and stainless steel. Besides, they are flexible and durable, very hard to break, long service life. This is a new solution. It helps to save costs.
Structure of detachable zipper puller
The structure of the detachable zipper puller is intricate. The front end of the nose puller links with the slider body as a whole. The rear end is bent to form a downward boss. However, the nose pull and the upper plate of the slider body form a pull nasal cavity. Hence, the elastic safety foot is available in the nasal cavity.
Seller arranges a slider with a boss on the upper plate of the slider body corresponding to the downward boss of the pulling nose. You should put the sliding block in the inclined sliding groove on the upper part of the upper plate. Then, the front end of the sliding groove has a compression spring. Moreover, the back end of the compression spring abuts against the front end of the sliding block.
In a specific application, we can offer a downward built-in boss on the inner side of the downward boss. Sometimes, we will install, disassemble, and replace the pull tab. But, it will be ok if the pull tab crosspiece or external force makes the slider boss and the nose boss dislocation.
1.The detachable zipper puller has an unsealed handle, which has two bayonets like the one in the picture.
2. We need to press the puller into the handle. Lift the handle then push the puller into the first bayonet.
3. Continue to push the puller until it locks in the second bayonet. We will press the bayonet into the zipper when the puller passes through it. Because it has been controlled by spring.
4. The puller is assembled.
5. Do you want to displace it with other pullers? Just take out the puller and assemble it with another by the above steps. When taking out the puller, please press the bayonet into the zipper, or you can’t take it out.